Indoor-Outdoor Carpet DisposalOkay, so there are two big sets of challenges in front of you. The first is the actual removal. The second is what to do with it once it’s up. For the most part, you can just call a local junk removal company to haul it away. When they come by, take the opportunity to offload and purge whatever else you no longer want, need, or don’t use. You can really lighten the load and free up a good amount of space and kill two birds with one stone.
Removing outdoor carpet is no easy task – often it is glued down to cement and makes the task much more difficult than removing indoor carpeting. As carpeting outdoors can make or break the environment and mood of the space, replacing an old worn out carpet though a difficult task can be rewarding by remaking the space into an enjoyable one. —Do It Yourself.comAlso, you’ll have one additional challenge. And, that’s not damaging the subfloor underneath. If it’s concrete, this might not be a problem. But, even if it is, or another material, there’s a chance you can damage it. So, proceed with caution to avoid causing yourself additional work, time, and expense.
DIY Indoor-Outdoor Carpet Removal Guide Sebastian Residents can UseTo remove indoor-outdoor carpet, you’ll have to do it step-by-step. Unfortunately, there are no workable shortcuts. So, here’s how to do indoor-outdoor carpet removal right. Start by emptying the room completely. Leave no furniture or decor behind. Then, do the following to remove indoor-outdoor carpet:
- Cut the carpet into sections. Cut into the carpet with a utility knife, scoring it from one end of the room to the other. Then, go across the room, creating four separate sections. Cut again in both directions until there’s four different sections.
- Scrape under the carpet with a floor scraper under the corners. Most indoor-outdoor carpet is glued to the subfloor to prevent folding and slipping. Which means you’ll need to use a floor scraper to get it free.
- Remove the adhesive from the subfloor. Lastly, you’ll need to remove the adhesive from the subfloor using glue dissolution solvent. Carefully follow the manufacturer’s instructions to get the best results.