Plant City Water-Damaged Ceiling Repair Guide You can Use

Water-damaged ceiling repair isn’t the toughest DIY job. But, it does require a level of skill and comfort with some finesse.

Repair versus Replace a Water-Damaged Ceiling

When dealing with a water damaged ceiling, there is usually more than meets the eye. Because of the structure of many residential homes, water soaks sight unseen into the trusts, joists, insulation, and ceiling. Only when these can no longer absorb water does the problem become readily apparent. In some cases, the moisture creeps and water runs down into the walls, creating worsening conditions.

Repairing ceiling water damage, whether it is the result of a broken pipe or torrential rainfall, is particularly important for the health and comfort of your home. Left unaddressed, the damage can lead to mold and a weakened structure. Regardless of whether it is made of drywall, plaster, or some other material, no ceiling can be fully protected against these vagaries of water. For this reason, it is important to know how to repair damage once it occurs. --Do It

However, if it’s only confined to a small area of the ceiling, it will be less work to fix. This isn’t to say it will be easy but at least it’s not too big to be overwhelming. Actually, when it comes down to it, there’s not much complexity but it does take some skill to make it look right.

Plant City Water-Damaged Ceiling Repair Guide You can Use

Okay, so you’ve got to start any water-damaged ceiling repair by preventing any more issues from the outside. Meaning, you must seal the outside roof. Depending on the type of roof over the home, this could mean a simple patch or replacing several components. Once the roof is sealed, do the following steps for water-damaged ceiling repair:

  1. Dry the interior ceiling. In order to patch the ceiling, you'll next need to dry out the damaged portion. Open the windows to let fresh air circulate and do its job. You can also point an oscillating fan toward the ceiling, as well.
  2. Cut away the damaged portion. After the interior ceiling is dry, you’ll need to cut out the damaged portion. If the ceiling is bulging, cut at least several inches around it, cutting out a square or rectangle. Wear a dust mask, eye protection, and always be careful when on a ladder.
  3. Fasten and tape the patch in-place. Next, cut a patch of drywall or sheetrock to put in place of the hole and fill it in. Be sure to measure twice and cut once. Then, see if it fits. Lastly, you'll have to tape it into place and then prime and re-paint the patch to finish.

To get rid of all the remodeling debris, simply phone 800-433-1094 or visit AAA Rousse Services.

Call to Book in Plant City, Florida
Enter zip code