
Credit: Creative Commons
Deck Disposal Options
Now, you might think you’ll just rent a dumpster. Simple enough and problem solved. But, it’s what you don’t know you don’t know. In other words, renting a dumpster isn’t a straightforward solution to the remodeling waste. Because you are the one who must fill it up, meaning you have to do all the work. Also, you can’t throw anything in the container. Dumpster rental companies prohibit certain items.Any wood used around the exterior of your home will deteriorate over time. It may become necessary to remove and replace lumber especially if it has ground contact. An exterior deck is a good example of this. The decking boards and the post can crack and split over time making the deck a safety hazard the needs to be taken care of. The do it yourself handyman can tear down and dismantle a deck with the help of a few friends. —HomeSteadyThen, there’s the matter of ordering the right size. Too small, and you’ll have to rent it all over again. Too large and it’s money wasted on wasted space. Whereas by hiring a junk removal company in the Port Charlotte area, all the work is done for you. And, you receive an upfront quote. Plus, you don’t have to deal with the required recycling and disposal procedures.
Port Charlotte Deck Disposal Guide
Now, let’s get into how to go about damaged wood deck removal by following these broad steps:- Clear the deck. It all begins with a blank slate. (Also, you need an empty space to work freely and without safety hazards.) Clear the deck of any furniture, cooking equipment, decor, and everything else. Leave nothing on it so you can work without stopping.
- Unfasten the rails. The handrails along outer portion of the deck must go first. (You’ll basically take it down in reverse order of how it was built.) Use a drill-driver and/or pry bar or claw hammer to remove the rails.
- Pull off the boards. Next, you’ll move on and pull up the individual wood planks. Remove these, starting from the outside of the deck and working your way toward the house.
- Pull the steps apart and cut the frame up. If so equipped, you’ll need to take apart the steps. Then, remove the support posts.