Kitchen Cabinet Disposal OptionsWhere you’ve got to start is actually at the end of the process. While that sounds strange, it’s actually one of the most common remodeling mistakes. Think about it this way. You’re ready to renovate your kitchen, so you go in and clear it out. Then, you begin to remove the cabinets and teardown the backsplash. Before you know it, there’s a huge pile of remodeling debris. Now, what to do with it?
A kitchen island stands away from the normal counter space. It provides an extra work surface as well as storage. If you need to move the island during a kitchen remodel, you may run into some issues. If yours contains a cooktop or sink, you may need to bring in a professional to move the gas, electrical or plumbing lines. —Do It Yourself.comThis is often the point many homeowners find themselves because they did not think ahead. They are so focused on the finished product, it doesn’t even occur to them they need remodeling debris disposal until it’s unavoidable. And, that’ puts them in a real pickle. So, do yourself a favor and be proactive.
Port Charlotte Kitchen DIY Cabinet RemovalOnce you have the remodeling debris disposal lined-up, you can take down those old fixtures to start your journey to a new and improved space. Here’s how to do old kitchen cabinet removal the easy way:
- Clear the area. Begin by clearing the whole area and putting up plastic and laying down drop cloths. You need to try to contain as much dirt and dust as possible to that room alone. Be sure to empty the cabinets and not leave anything inside.
- Remove the doors. Next, take off the doors. (Leave the handles on so they are easy to carry.) Just unfasten the hinges and pull the doors off the cabinets. Then, place them to the side.
- Take off the hardware. Now, remove any other hardware from the cabinets (if applicable), along with the shelves. Put the hardware and shelves aside, also so they aren’t a tripping hazard.
- Pull the cabinet shells down. With the doors, hardware, and shelves out of the way, you can then remove the cabinet shells. You might have to unfasten retaining screws and/or pry them out of place.