Water-Damaged Ceiling Disposal in WestchaseBefore you begin tearing stuff out, be sure to have a plan for all the waste you’ll generate. Don’t make the gigantic mistake of skipping over the inevitable waste disposal because it’s a hard and fast reality. So, schedule remodeling debris junk clean up prior to starting and you won’t have to worry about what to do with all that waste.
Repairing ceiling water damage, whether it is the result of a broken pipe or torrential rainfall, is particularly important for the health and comfort of your home. Left unaddressed, the damage can lead to mold and a weakened structure. Regardless of whether it is made of drywall, plaster, or some other material, no ceiling can be fully protected against these vagaries of water. For this reason, it is important to know how to repair damage once it occurs. —Do It YourselfAlso, take steps to ensure the rest of your possessions are safe. In other words, move stuff away and cover things up to avoid any more damage. When dealing with a water damaged ceiling, there is usually more than meets the eye. Because of the structure of many residential homes, water soaks sight unseen into the trusts, joists, insulation, and ceiling.
Repair GuideOkay, so you’ve got to start any water-damaged ceiling repair by preventing any more issues from the outside. Meaning, you must seal the outside roof. Depending on the type of roof over the home, this could mean a simple patch or replacing several components. Once the roof is sealed, do the following steps for water-damaged ceiling repair:
- Dry the interior ceiling. In order to patch the ceiling, you’ll next need to dry out the damaged portion. Open the windows to let fresh air circulate and do its job. You can also point an oscillating fan toward the ceiling, as well.
- Cut away the damaged portion. After the interior ceiling is dry, you’ll need to cut out the damaged portion. If the ceiling is bulging, cut at least several inches around it, cutting out a square or rectangle. Wear a dust mask, eye protection, and always be careful when on a ladder.
- Fasten and tape the patch in-place. Next, cut a patch of drywall or sheetrock to put in place of the hole and fill it in. Be sure to measure twice and cut once. Then, see if it fits. Lastly, you’ll have to tape it into place and then prime and repaint the patch to finish.