Credit: Wikimedia Commons
Undercounter dishwasher removal. Sounds like a big chore -- and it largely is just that. But, just about anyone can do it, if necessary. Although, it’s best to leave it to an experienced professional. However, you can go the DIY route, it just takes a bit of careful execution. Meaning, there are some parts which require basic skills for an undercounter dishwasher removal.
Failing Dishwasher Signs
Of course, you don’t want to jump the gun. There must be a legitimate reason for a built-in dishwasher removal. Otherwise, you can skip the whole thing and just have it repaired. The question now becomes, is it really time for it to go? Well, you should look for some common failing dishwasher signs. For instance, if it goes through a whole cycle but doesn’t clean. Or, water pools around the bottom of the appliance.
Removing an undercounter dishwasher and replacing it will take an experienced installer less than an hour. You probably won’t manage the job that quickly, but it is a relatively simple procedure, especially because the plumbing and electrical hookups are already in place. And by doing the work yourself, you can save the $100 or more a retailer will charge, or step up to a model with more features. --This Old House
Those two symptoms are bad news and likely mean you’ll need a replacement built-in dishwasher. Or, if the thing overfills and under-fills with water during operation. Strange sounds are also an indication that it’s dying out. The truth is, in most cases, it’s usually less expensive to replace it than fix it. And, if you do, you’ll get a new appliance, which is a big plus because it will use less water and energy.
Wilton Manors Undercounter Dishwasher Removal Guide
Now, when it comes to a undercounter dishwasher removal, you’ll only need a few common tools and some supplies. A bucket and towels will come in handy, along with a set of screwdrivers or drill-driver.
- Empty the dishwasher. First, if there are any dishes inside the unit, take them out and put them to the side. You don’t need the headache of dealing with broken glasses and dishes on top of what you’re already doing.
- Disconnect the power and water supplies. Disconnect the power supply (or shut it off at the breaker on the main electrical panel) and also disconnect or turn off the water supply.
- Disconnect the drain line from the appliance. Next, you’ll need to disconnect the drain line running from the unit. Be sure to have a bucket and towels ready to go so you aren’t taken by surprise.
- Unfasten the retaining screws. Now, unfasten the retaining screws located under the lip of the countertop and place them to the side. The appliance can then be pulled out of place. Unhook the water lines and pull it out.
If you need appliance removal and disposal, go ahead and phone 800-433-1094 or visit AAA Rousse Services.